Laser Safety Eyewear

Laser safety eyewear is an important part of personal protective equipment when a risk assessment shows that the eyes may be exposed to hazardous laser radiation. The correct protective eyewear must be selected according to the wavelength, power, operating mode and potential exposure associated with the laser system.

LMI AB offers laser safety eyewear from Lasermet for different types of industrial laser systems and applications. The range includes both lightweight polycarbonate eyewear and models with mineral glass filters for applications requiring different or higher levels of protection.

There is no universal pair of laser safety glasses that provides suitable protection against every type of laser radiation. Eyewear may provide a very high level of protection within one wavelength range while providing little or no protection at other wavelengths.

The selection must therefore be based on the actual laser installation and take into account factors such as:

  • laser wavelength or wavelength ranges
  • continuous-wave or pulsed operation
  • laser power and pulse energy
  • pulse duration and repetition rate
  • potential exposure and beam characteristics
  • required level of protection
  • visibility and colour perception
  • working environment and duration of use.

For high-power or complex laser systems, eyewear selection should form part of the overall laser safety risk assessment and, where appropriate, involve an LSO (Laser Safety Officer) or another person with relevant laser safety expertise.

EN 207 and EN 208

Laser safety eyewear for European workplaces is normally specified according to EN 207, which covers filters and eye protection against laser radiation. The standard considers not only how effectively the filter attenuates laser radiation, but also its ability to withstand the relevant laser exposure.

EN 208 applies to specialised eyewear intended for laser adjustment and alignment work within the visible wavelength range. This type of eyewear is designed to reduce the radiation to an appropriate level while allowing the laser spot to remain visible during alignment. EN 208 alignment eyewear should not be confused with conventional laser safety eyewear according to EN 207.

Optical Density – OD

Optical Density (OD) describes how strongly a filter attenuates laser radiation at a specific wavelength. The higher the OD value, the greater the attenuation.

However, OD alone is not sufficient to determine whether a pair of glasses provides appropriate protection. A filter may have high optical attenuation but can still be damaged if exposed to a power or energy density beyond what the material is designed to withstand.

This is one reason why EN 207 considers the filter’s resistance to laser exposure in addition to optical attenuation.

Laser safety eyewear should therefore not be selected solely on the basis of an OD value.

Wavelength Is Critical

Different laser technologies operate at different wavelengths and may therefore require completely different filters. Fiber lasers, Nd:YAG lasers, diode lasers, CO₂ lasers, UV lasers and other laser systems can have very different protection requirements.

It is the specified protection level for the relevant wavelength range that determines whether the eyewear is suitable – not the colour of the lens.

A laser safety filter can also provide protection across several separate wavelength ranges, which can be important in systems involving multiple laser or process wavelengths.

Visible Light Transmission – VLT

Another important parameter is VLT (Visible Light Transmission), which indicates how much visible light passes through the filter.

A filter providing a high level of laser protection can, in some cases, also be relatively dark. Selecting suitable eyewear therefore involves finding an appropriate balance between the required laser protection and sufficient visibility to perform the work safely. Different filters consequently have different colours and VLT values depending on the wavelength ranges and protection levels for which they are designed.

Polycarbonate or Mineral Glass?

LMI AB offers two main types of laser safety eyewear from Lasermet.

Polycarbonate Laser Safety Eyewear – LM Series

Lasermet’s LM Series consists of lightweight polycarbonate laser safety eyewear. The range includes numerous filters for different wavelength ranges and combines low weight with good optical clarity and comfort.

Polycarbonate eyewear is therefore a practical solution for many industrial laser installations, particularly where protective eyewear needs to be worn for extended periods.

View the Lasermet LM Series →

Mineral Glass Laser Safety Eyewear – LR Series

Lasermet’s LR Series with mineral glass filters offers a range of filter and frame options. Mineral glass can be particularly suitable for applications requiring different or higher protection levels and specific optical properties.

The appropriate filter is selected according to the wavelength, laser parameters and required protection for the particular application.

View the Lasermet LR Series →

Laser Safety Eyewear Is the Final Protective Barrier

Laser safety eyewear is personal protective equipment and should not replace technical safety measures.

In industrial laser systems, risks should primarily be reduced through measures such as enclosures, interlock systems, beam containment, controlled access and safe operating procedures. Protective eyewear provides an additional layer of protection where the risk assessment shows that hazardous exposure may still occur.

This is particularly important with open laser systems and during service, adjustment and maintenance, where normal enclosures or other technical safeguards may be opened, removed or bypassed.

Help Selecting the Right Laser Safety Eyewear

Selecting appropriate laser safety eyewear requires more information than simply knowing the type of laser being used.

LMI AB can help identify suitable protection based on the laser installation, wavelength, operating mode and other relevant conditions.Contact LMI AB if you need help selecting the right laser safety eyewear for your application.

Urban Gärds

+46 (0)281-307 16

urban.gards@lmiab.se